【英文标准名称】:StandardSpecificationforSteelCastings,FerriticandMartensitic,forPressure-ContainingandOtherApplications,forLow-TemperatureService
【原文标准名称】:低温承压设备及其它设备用铁素体和马氏体钢铸件的标准规格
【标准号】:ASTMA757/A757M-2010
【标准状态】:现行
【国别】:
【发布日期】:2010
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.18
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:合金钢;碳钢;铁素体;熔模铸造;低温处理;马氏体不锈钢;承压;不锈钢;钢铸件
【英文主题词】:alloysteel;carbonsteel;ferritic;investmentcastings;lowtemperatureservice;martensiticstainlesssteel;pressurecontaining;stainlesssteel;steelcastings
【摘要】:1.1Thisspecificationcoverscarbonandalloysteelcastingsforpressure-containingandotherapplicationsintendedprimarilyforpetroleumandgaspipelinesinareassubjecttolow-ambienttemperatures.Castingsshallbeheattreatedbynormalizingandtemperingorliquidquenchingandtempering.Allclassesareweldableunderproperconditions.Hardenabilityofsomegradesmaylimitusablesectionsize.1.2Thevaluesstatedineitherinch-poundunitsorSIunitsaretoberegardedseparatelyasstandard.Thevaluesstatedineachsystemarenotexactequivalents;therefore,eachsystemmustbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.1.2.1Unlesstheorderspecifiesanx201C;Mx201D;designation,thematerialshallbefurnishedtoinch-poundunits.1.3Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:J31
【国际标准分类号】:77_140_80
【页数】:9P.;A4
【正文语种】:
基本信息
标准名称: | 试验筛 技术要求和检验 第1部分:金属丝编织网试验筛 |
英文名称: | Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth |
中标分类: |
综合 >>
基础标准 >>
筛分、筛板与筛网 |
ICS分类: |
试验 >>
粒度分析、筛分
|
替代情况: | 替代GB/T 6003.1-1997 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2012-09-03 |
实施日期: | 2013-03-01 |
首发日期: | 1985-05-22 |
作废日期: | |
主管部门: | 全国颗粒表征与分检及筛网标准化技术委员会(SAC/TC 168) |
提出单位: | 全国颗粒表征与分检及筛网标准化技术委员会(SAC/TC 168) |
归口单位: | 全国颗粒表征与分检及筛网标准化技术委员会(SAC/TC 168) |
起草单位: | 中机生产力促进中心、新乡市巴山精密滤材有限公司、河南新乡新航丝网滤器有限公司 |
起草人: | 余方、刘鹤青、宋如轩、陈衍油 |
出版社: | 中国标准出版社 |
出版日期: | 2013-03-01 |
页数: | 20页 |
适用范围
GB/T6003的本部分规定了金属丝编织网试验筛的技术要求和试验方法。
本部分适用于GB/T6005中筛孔尺寸从20μm 到125mm 的试验筛。
前言
没有内容
目录
没有内容
引用标准
下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件,仅注日期的版本适用于本文件。凡是不注日期的引用文件,其最新版本(包括所有的修改单)适用于本文件。
GB/T5329 试验筛与筛分试验 术语(ISO2395:1990,MOD)
GB/T6005—2008 试验筛 金属丝编织网、穿孔板和电成型薄板 筛孔的基本尺寸(ISO565:1990,MOD)
ISO2591-1:1988 筛分试验 第1部分:用于金属丝编织网及金属穿孔板的筛分试验方法(Testsieving—Part1:Methodsusingtestsievesofwovenwireclothandperforatedmetalplate)
所属分类: 综合 基础标准 筛分 筛板与筛网 试验 粒度分析 筛分